Innovative Coatings Technology

total seal

Total Seal is a two-part epoxy coating system that has been specifically designed with additives to promote adhesion when used on concrete and masonry. Total Seal was developed to be applied to surfaces that have hydrostatic pressures and moisture mitigation. It is a water repelling epoxy for use under water or in areas where constant splashing or condensation is a problem. It is resistant to chemicals and solvents, and can be applied directly to concrete, masonry and wood.

Total Seal provides excellent solvent and chemical resistance. Total Seal is commonly used to coat concrete floors or concrete block walls and as an excellent liner to block water leakage.

Total Seal can be tinted to any color. It dries to a semi-gloss finish and is resistant to scuff and direct impact.

Typical Uses:

  • As a one-coat system for interior concrete block walls
  • As a system to seal leaking concrete walls and floors due to hydrostatic pressure
  • As a one-coat system for swimming pools
  • Very good acid and alkali resistance
  • As a one-coat system for warehouse flooring

Test and Certifications:

  • USDA approved
  • ASTM B117 - Salt spray corrosion test
  • ASTM D1654 - 450 hour evaluation over black steel

Field Test Have Proven

  • The coating has outstanding adhesion
  • The coating is resistant to solvents and chemical splashes
  • The coating is flexible, yet resistant to impact